Wanted: Someone with spare time and a welder

Cody1771 · 02-12-2010, 12:31 AM

Hey Guys, im tired of that ugly canopy on my truck and wanan get my RTT back on my bed rails. i found out that a wood frame doesnt cut it for off roading so i need a metal one. so my plan is to get 2 8 foot long sections of
2"x2" angle, bolt it to the bed rails and eather run 2" pipe, or 2"x2" square pipeing to support the RTT. pretty simple but i dont have acess to a welder. was wondering if anyone here would be willing to lend a hand for some cash and/or beer. or whatever your poison is.

RamRod · 02-12-2010, 10:29 AM

Where do you live? If I remeber right its in BC right?

Waytec · 02-12-2010, 11:08 AM

If you watch Kijiijs, Crags' list and actions you can pick up 110 welders cheap. I bout 3 at a auction for $100. sold 2 of them for $100 everyone was happy. The only issue with 110s is they are usually 20A but if you turn them down real low you can weld on normal house plug for a short time.

Cody1771 · 02-12-2010, 04:44 PM

yeah i live in Kits, in Vancouver. i dont even have a driveway :P id have to run a pretty long extension cord to do it on the front street...

Lone Ranger · 02-12-2010, 06:54 PM

Hey Cody, I just picked up another 11lb roll of wire and new consumables for the welder and plasma cutter, so you're more than welcome to wander out to use them. I know it ain't too close to Kits but once you get here you probably won't want to go back to the city rush either! Budweiser's always welcome too!! LR

Cody1771 · 02-12-2010, 10:51 PM

i might take you up on that offer, ill let you know. im stuck up north untill Feb 24th though.

02-12-2010, 12:31 AM	#1
Cody1771 OLC Member Join Date: Oct 2009 Posts: 398	Wanted: Someone with spare time and a welder Hey Guys, im tired of that ugly canopy on my truck and wanan get my RTT back on my bed rails. i found out that a wood frame doesnt cut it for off roading so i need a metal one. so my plan is to get 2 8 foot long sections of 2"x2" angle, bolt it to the bed rails and eather run 2" pipe, or 2"x2" square pipeing to support the RTT. pretty simple but i dont have acess to a welder. was wondering if anyone here would be willing to lend a hand for some cash and/or beer. or whatever your poison is.

02-12-2010, 11:08 AM	#3
Waytec OLC Member Join Date: Dec 2009 Location: Red Deer Alberta Posts: 70	If you watch Kijiijs, Crags' list and actions you can pick up 110 welders cheap. I bout 3 at a auction for $100. sold 2 of them for $100 everyone was happy. The only issue with 110s is they are usually 20A but if you turn them down real low you can weld on normal house plug for a short time. __________________ 91 XJ , 90 MJ Support Unit The obstacle is the path.

02-12-2010, 06:54 PM	#5
Lone Ranger OLC Member Join Date: Aug 2009 Location: Fernridge, BC Posts: 490	Hey Cody, I just picked up another 11lb roll of wire and new consumables for the welder and plasma cutter, so you're more than welcome to wander out to use them. I know it ain't too close to Kits but once you get here you probably won't want to go back to the city rush either! Budweiser's always welcome too!! LR __________________ Matt T. Has been known to eat roadkill ----------------------- '09 Ford Ranger FX4 w/ 6' camper '07 Yamaha Grizzly 700 on 7' trailer 16' canoe w/ 3.9 hp Merc outboard

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-12-2010, 10:29 AM	#2
RamRod OLC Member Join Date: Feb 2010 Location: Edmonton, AB Posts: 147	Where do you live? If I remeber right its in BC right?

02-12-2010, 04:44 PM	#4
Cody1771 OLC Member Join Date: Oct 2009 Posts: 398	yeah i live in Kits, in Vancouver. i dont even have a driveway :P id have to run a pretty long extension cord to do it on the front street...

02-12-2010, 10:51 PM	#6
Cody1771 OLC Member Join Date: Oct 2009 Posts: 398	i might take you up on that offer, ill let you know. im stuck up north untill Feb 24th though.